Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UBE Nylon 1013 NW8 - PA6 - UBE

Material Data Center offers the following functions for UBE Nylon 1013 NW8:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ube Nylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.012 mm/mm ASTM D 955
성형 수축률, 수직 0.013 mm/mm ASTM D 955
기계적 특성값단위시험규격
ASTM 데이터
항복강도 80 MPa ASTM D 638
파단시 강도 65 MPa ASTM D 638
파단시 신율 100 % ASTM D 638
굴곡 계수 2850 MPa ASTM D 790
굴곡 강도 110 MPa ASTM D 790
로크웰 경도 R 120 - ASTM D 785
아이조드 충격은 노치, 1/8 in 62.5 J/m ASTM D 256
열적 특성값단위시험규격
ASTM 데이터
UL94 난연성 V-2 - UL 94
DTUL @ 66 psi 195 °C ASTM D 648
DTUL @ 264 psi 75 °C ASTM D 648
녹는점 220 °C ASTM D 3418
기타 특성값단위시험규격
밀도 1140 kg/m³ ASTM D 792
특징
생산 공정
사출 성형
인도 유형
자연 색상
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.